Jump to content

Potassium thiocyanate

From Wikipedia, the free encyclopedia
Potassium thiocyanate
Names
Other names
Potassium sulfocyanate
Potassium isothiocyanate (tautomeric form)
Potassium thiocyanide
Potassium rhodanide
Identifiers
3D model (JSmol)
3594799
ChEBI
ChemSpider
ECHA InfoCard 100.005.792 Edit this at Wikidata
EC Number
  • 206-370-1
21362
RTECS number
  • XL1925000
UNII
  • InChI=1S/CHNS.K/c2-1-3;/h3H;/q;+1/p-1 checkY
    Key: ZNNZYHKDIALBAK-UHFFFAOYSA-M checkY
  • InChI=1/CHNS.K/c2-1-3;/h3H;/q;+1/p-1
    Key: ZNNZYHKDIALBAK-REWHXWOFAT
  • C(#N)[S-].[K+]
Properties
KSCN
Molar mass 97.181 g mol−1
Appearance Colorless deliquescent crystals
Odor Odorless
Density 1.886 g/cm3
Melting point 173.2 °C (343.8 °F; 446.3 K)
Boiling point 500 °C (932 °F; 773 K) (decomposes)
177 g/100 mL (0 °C)
217 g/100 mL (20 °C)
Solubility acetone: 21.0 g/100 mL
ethanol: soluble
−48.0·10−6 cm3/mol
Hazards
GHS labelling:
GHS05: CorrosiveGHS07: Exclamation mark
Warning
H302, H312, H318, H319, H332, H412
P261, P264, P270, P271, P273, P280, P301+P312, P302+P352, P304+P312, P304+P340, P305+P351+P338, P310, P312, P322, P330, P337+P313, P363, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
0
0
Lethal dose or concentration (LD, LC):
854 mg/kg (oral, rat)[1]
Safety data sheet (SDS) ICSC 1088
Related compounds
Other anions
Potassium cyanate
Potassium cyanide
Other cations
Sodium thiocyanate
Ammonium thiocyanate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Potassium thiocyanate is the chemical compound with the molecular formula KSCN. It is an important salt of the thiocyanate anion, one of the pseudohalides. The compound has a low melting point relative to most other inorganic salts.

Uses

[edit]

Chemical synthesis

[edit]

Aqueous KSCN reacts almost quantitatively with Pb(NO3)2 to give Pb(SCN)2, which has been used to convert acyl chlorides to isothiocyanates.[2]

KSCN converts ethylene carbonate to ethylene sulfide.[3] For this purpose, the KSCN is first melted under vacuum to remove water. In a related reaction, KSCN converts cyclohexene oxide to the corresponding episulfide and KOCN. [4]

KSCN is also the starting product for the synthesis of carbonyl sulfide.

Special effects

[edit]

Dilute aqueous KSCN is occasionally used for moderately realistic blood effects in film and theatre. It can be painted onto a surface or kept as a colorless solution. When in contact with ferric chloride solution (or other solutions containing Fe3+), the product of the reaction is a solution with a blood red colour, due to the formation of the thiocyanatoiron complex ion. Thus this chemical is often used to create the effect of 'stigmata'. Because both solutions are colorless, they can be placed separately on each hand. When the hands are brought into contact, the solutions react and the effect looks remarkably like stigmata.[citation needed]

Laboratory

[edit]

The reaction with Fe3+ mentioned above is used as a test for Fe3+ ions in the laboratory.

Law enforcement

[edit]

Approximate cocaine purity can be determined using 1 mL 2% cupric sulphate pentahydrate in dilute HCl, 1 mL 2% potassium thiocyanate and 2 mL of chloroform. The shade of brown shown by the chloroform is proportional to the cocaine content. This test is not cross sensitive to heroin, methamphetamine, benzocaine, procaine and a number of other drugs but other chemicals could cause false positives.[5]

References

[edit]
  1. ^ "Potassium thiocyanate [NF]". chem.sis.nlm.nih.gov. Archived from the original on 20 April 2018. Retrieved 19 April 2018.
  2. ^ Smith, P. A. S.; Kan, R. O. (1973). "2a-Thiohomophthalimide". Organic Syntheses; Collected Volumes, vol. 5, p. 1051.
  3. ^ Searles, S.; Lutz, E. F.; Hays, H. R.; Mortensen, H. E. (1973). "Ethylenesulfide". Organic Syntheses; Collected Volumes, vol. 5, p. 562.
  4. ^ van Tamelen, E. E. (1963). "Cyclohexenesulfide". Organic Syntheses; Collected Volumes, vol. 4, p. 232.
  5. ^ Travnikoff B (1 April 1983). "Semiquantitative screening test for cocaine". Analytical Chemistry. 55 (4): 795–796. doi:10.1021/ac00255a048. ISSN 0003-2700.