In digital signal processing, upsampling, expansion, and interpolation are terms associated with the process of resampling in a multi-rate digital signal processing system. Upsampling can be synonymous with expansion, or it can describe an entire process of expansion and filtering (interpolation).[1][2][3] When upsampling is performed on a sequence of samples of a signal or other continuous function, it produces an approximation of the sequence that would have been obtained by sampling the signal at a higher rate (or density, as in the case of a photograph). For example, if compact disc audio at 44,100 samples/second is upsampled by a factor of 5/4, the resulting sample-rate is 55,125.

Fig 1: Depiction of one dot product, resulting in one output sample (in green), for the case L=4, n=9, j=3. Three conceptual "inserted zeros" are depicted between each pair of input samples. Omitting them from the calculation is what distinguishes a multirate filter from a monorate filter.

Upsampling by an integer factor

edit

Rate increase by an integer factor   can be explained as a 2-step process, with an equivalent implementation that is more efficient:[4]

  1. Expansion: Create a sequence,   comprising the original samples,   separated by   zeros.  A notation for this operation is:   
  2. Interpolation: Smooth out the discontinuities using a lowpass filter, which replaces the zeros.

In this application, the filter is called an interpolation filter, and its design is discussed below. When the interpolation filter is an FIR type, its efficiency can be improved, because the zeros contribute nothing to its dot product calculations. It is an easy matter to omit them from both the data stream and the calculations. The calculation performed by a multirate interpolating FIR filter for each output sample is a dot product:[a]

    and for any      

(Eq.1)

where the   sequence is the impulse response of the interpolation filter, and   is the largest value of   for which   is non-zero.

Derivation of Eq.1

The interpolation filter output sequence is defined by a convolution:

 

The only terms for which   can be non-zero are those for which   is an integer multiple of    Thus:    for integer values of    and the convolution can be rewritten as:

 


In the case    function   can be designed as a half-band filter, where almost half of the coefficients are zero and need not be included in the dot products. Impulse response coefficients taken at intervals of   form a subsequence, and there are   such subsequences (called phases) multiplexed together. Each of   phases of the impulse response is filtering the same sequential values of the   data stream and producing one of   sequential output values. In some multi-processor architectures, these dot products are performed simultaneously, in which case it is called a polyphase filter.

For completeness, we now mention that a possible, but unlikely, implementation of each phase is to replace the coefficients of the other phases with zeros in a copy of the   array, and process the    sequence at   times faster than the original input rate. Then   of every   outputs are zero. The desired   sequence is the sum of the phases, where   terms of the each sum are identically zero.  Computing   zeros between the useful outputs of a phase and adding them to a sum is effectively decimation. It's the same result as not computing them at all. That equivalence is known as the second Noble identity.[5] It is sometimes used in derivations of the polyphase method.

Interpolation filter design

edit
 
Fig 2: The first triangle of the first graph represents the Fourier transform X(f) of a continuous function x(t). The entirety of the first graph depicts the discrete-time Fourier transform of a sequence x[n] formed by sampling the continuous function x(t) at a low-rate of 1/T. The second graph depicts the application of a lowpass filter at a higher data-rate, implemented by inserting zero-valued samples between the original ones. And the third graph is the DTFT of the filter output. The bottom table expresses the maximum filter bandwidth in various frequency units used by filter design tools.

Let   be the Fourier transform of any function,   whose samples at some interval,   equal the   sequence. Then the discrete-time Fourier transform (DTFT) of the   sequence is the Fourier series representation of a periodic summation of  [b]

     

(Eq.2)

When   has units of seconds,   has units of hertz (Hz). Sampling   times faster (at interval  ) increases the periodicity by a factor of  [c]

     

(Eq.3)

which is also the desired result of interpolation. An example of both these distributions is depicted in the first and third graphs of Fig 2.[6] 

When the additional samples are inserted zeros, they decrease the sample-interval to   Omitting the zero-valued terms of the Fourier series, it can be written as:

 

which is equivalent to Eq.2, regardless of the value of   That equivalence is depicted in the second graph of Fig.2. The only difference is that the available digital bandwidth is expanded to  , which increases the number of periodic spectral images within the new bandwidth. Some authors describe that as new frequency components.[7]  The second graph also depicts a lowpass filter and   resulting in the desired spectral distribution (third graph). The filter's bandwidth is the Nyquist frequency of the original   sequence.[A]  In units of Hz that value is    but filter design applications usually require normalized units. (see Fig 2, table)

Upsampling by a fractional factor

edit

Let L/M denote the upsampling factor, where L > M.

  1. Upsample by a factor of L
  2. Downsample by a factor of M

Upsampling requires a lowpass filter after increasing the data rate, and downsampling requires a lowpass filter before decimation. Therefore, both operations can be accomplished by a single filter with the lower of the two cutoff frequencies. For the L > M case, the interpolation filter cutoff,    cycles per intermediate sample, is the lower frequency.

See also

edit

Notes

edit
  1. ^ Realizable low-pass filters have a transition band where the response diminishes from near unity to near zero. So in practice the cutoff frequency is placed far enough below the theoretical cutoff that the filter's transition band is contained below the theoretical cutoff.

Page citations

edit
  1. ^ Crochiere and Rabiner "2.3". p 38. eq 2.80, where     which also requires     and   
  2. ^ Harris 2004. "2.2". p 23. fig 2.12 (top).
  3. ^ Harris 2004. "2.2". p 23. fig 2.12 (bottom).

References

edit
  1. ^ Oppenheim, Alan V.; Schafer, Ronald W.; Buck, John R. (1999). "4.6.2". Discrete-Time Signal Processing (2nd ed.). Upper Saddle River, N.J.: Prentice Hall. p. 172. ISBN 0-13-754920-2.
  2. ^ Crochiere, R.E.; Rabiner, L.R. (1983). "2.3". Multirate Digital Signal Processing. Englewood Cliffs, NJ: Prentice-Hall. pp. 35–36. ISBN 0136051626.
  3. ^ Poularikas, Alexander D. (September 1998). Handbook of Formulas and Tables for Signal Processing (1 ed.). CRC Press. pp. 42–48. ISBN 0849385792.
  4. ^ Harris, Frederic J. (2004-05-24). "2.2". Multirate Signal Processing for Communication Systems. Upper Saddle River, NJ: Prentice Hall PTR. pp. 20–21. ISBN 0131465112. The process of up sampling can be visualized as a two-step progression. The process starts by increasing the sample-rate of an input series x(n) by resampling [expansion]. The zero-packed time series is processed by a filter h(n). In reality the processes of sample-rate increase and bandwidth reduction are merged in a single process called a multirate filter.
  5. ^ Strang, Gilbert; Nguyen, Truong (1996-10-01). Wavelets and Filter Banks (2 ed.). Wellesley, MA: Wellesley-Cambridge Press. p. 101. ISBN 0961408871. the Noble Identities apply to each polyphase component ... they don't apply to the whole filter.
  6. ^ Tan, Li (2008-04-21). "Upsampling and downsampling". eetimes.com. EE Times. Retrieved 2024-06-27. chapter 12.1.2, figure 12-5B
  7. ^ Lyons, Rick (2015-03-23). "Why Time-Domain Zero Stuffing Produces Multiple Frequency-Domain Spectral Images". dsprelated.com. Archived from the original on 2023-09-30. Retrieved 2024-01-31.

Further reading

edit