Jump to content

User talk:JP1308

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

A belated welcome!

[edit]
The welcome may be belated, but the cookies are still warm!

Here's wishing you a belated welcome to Wikipedia, JP1308. I see that you've already been around a while and wanted to thank you for your contributions. Though you seem to have been successful in finding your way around, you may benefit from following some of the links below, which help editors get the most out of Wikipedia:

Also, when you post on talk pages you should sign your name using four tildes (~~~~); that should automatically produce your username and the date after your post.

I hope you enjoy editing here and being a Wikipedian! If you have any questions, feel free to leave me a message on my talk page, consult Wikipedia:Questions, or place {{helpme}} on your talk page and ask your question there.

Again, welcome! Doug Weller talk 13:07, 21 January 2018 (UTC)[reply]

Your submission at Articles for creation: sandbox (July 19)

[edit]
Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Dodger67 was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.
Roger (Dodger67) (talk) 20:04, 19 July 2017 (UTC)[reply]


Teahouse logo
Hello! JP1308, I noticed your article was declined at Articles for Creation, and that can be disappointing. If you are wondering why your article submission was declined, please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there! Roger (Dodger67) (talk) 20:04, 19 July 2017 (UTC)[reply]


Articles you might like to edit, from SuggestBot

[edit]

SuggestBot predicts that you will enjoy editing some of these articles. Have fun!

Views/Day Quality Title Tagged with…
10 Quality: Medium, Assessed class: Start, Predicted class: C GOES 1 (talk) Add sources
59 Quality: Low, Assessed class: Stub, Predicted class: Stub Steven Cole (talk) Add sources
14 Quality: Low, Assessed class: Stub, Predicted class: Stub J. D. Hall (talk) Add sources
97 Quality: Medium, Assessed class: Stub, Predicted class: C DirecTV satellite fleet (talk) Add sources
63 Quality: Medium, Assessed class: Start, Predicted class: C Emily Greene Balch (talk) Add sources
194 Quality: Medium, Assessed class: Stub, Predicted class: B Comparison of orbital rocket engines (talk) Add sources
8 Quality: Medium, Assessed class: Start, Predicted class: C Algol (rocket stage) (talk) Cleanup
11 Quality: Low, Assessed class: Stub, Predicted class: Start Badr-4 (talk) Cleanup
85 Quality: Medium, Assessed class: C, Predicted class: C Aggregat (rocket family) (talk) Cleanup
6 Quality: Low, Assessed class: Stub, Predicted class: Start TDRS-10 (talk) Expand
181 Quality: Medium, Assessed class: Start, Predicted class: C Aerojet Rocketdyne (talk) Expand
384 Quality: High, Assessed class: Start, Predicted class: GA Falcon 9 Full Thrust (talk) Expand
151 Quality: Medium, Assessed class: Start, Predicted class: C Noble House (talk) Unencyclopaedic
53 Quality: Medium, Assessed class: Stub, Predicted class: C Whirlwind (novel) (talk) Unencyclopaedic
252 Quality: Medium, Assessed class: Start, Predicted class: B Reusable launch system (talk) Unencyclopaedic
153 Quality: Medium, Assessed class: Start, Predicted class: C Subcooling (talk) Merge
6 Quality: Low, Assessed class: NA, Predicted class: Start Advanced Extremely High Frequency (satellite) (talk) Merge
375 Quality: Medium, Assessed class: Start, Predicted class: C Launch vehicle (talk) Merge
122 Quality: Low, Assessed class: Stub, Predicted class: Start Frank de Kova (talk) Wikify
63 Quality: Medium, Assessed class: Start, Predicted class: C Dink, the Little Dinosaur (talk) Wikify
5 Quality: Low, Assessed class: Stub, Predicted class: Stub Bernard C. Schoenfeld (talk) Wikify
2 Quality: Low, Assessed class: Start, Predicted class: Start James Elward (talk) Orphan
2 Quality: Low, Assessed class: Stub, Predicted class: Start Gorizont 33 (talk) Orphan
12 Quality: High, Assessed class: C, Predicted class: GA Susan G. Finley (talk) Orphan
4 Quality: Low, Assessed class: Stub, Predicted class: Start JCSAT-4A (talk) Stub
6 Quality: Low, Assessed class: Start, Predicted class: Stub GOES-T (talk) Stub
6 Quality: Low, Assessed class: Stub, Predicted class: Start USA-204 (talk) Stub
5 Quality: Low, Assessed class: Stub, Predicted class: Start Synchronous Meteorological Satellite (talk) Stub
17 Quality: Low, Assessed class: NA, Predicted class: Stub GOES-S (talk) Stub
10 Quality: Low, Assessed class: Stub, Predicted class: Start GOES-G (talk) Stub

Note: All columns in this table are sortable, allowing you to rearrange the table so the articles most interesting to you are shown at the top. All images have mouse-over popups with more information. For more information about the columns and categories, please consult the documentation and please get in touch on SuggestBot's talk page with any questions you might have.

SuggestBot picks articles in a number of ways based on other articles you've edited, including straight text similarity, following wikilinks, and matching your editing patterns against those of other Wikipedians. It tries to recommend only articles that other Wikipedians have marked as needing work. Your contributions make Wikipedia better — thanks for helping.

If you have feedback on how to make SuggestBot better, please tell me on SuggestBot's talk page. Thanks from Nettrom (talk), SuggestBot's caretaker. -- SuggestBot (talk) 08:13, 30 July 2017 (UTC)[reply]

Welcome to The Wikipedia Adventure!

[edit]
Hi JP1308! We're so happy you wanted to play to learn, as a friendly and fun way to get into our community and mission. I think these links might be helpful to you as you get started.

-- 11:44, Sunday, July 30, 2017 (UTC)

Your submission at Articles for creation: TIP TIG has been accepted

[edit]
TIP TIG, which you submitted to Articles for creation, has been created.
The article has been assessed as Start-Class, which is recorded on the article's talk page. You may like to take a look at the grading scheme to see how you can improve the article.

You are more than welcome to continue making quality contributions to Wikipedia. Note that because you are a logged-in user, you can create articles yourself, and don't have to post a request. However, you may continue submitting work to Articles for Creation if you prefer.

Thank you for helping improve Wikipedia!

SwisterTwister talk 20:53, 2 August 2017 (UTC)[reply]

Speedy deletion nomination of TIP TIG

[edit]

Hello JP1308,

I wanted to let you know that I just tagged TIP TIG for deletion, because it seems to be copied from another source, probably infringing copyright.

If you feel that the article shouldn't be deleted and want more time to rewrite it in your own words, you can contest this deletion, but please don't remove the speedy deletion tag from the top.

You can leave a note on my talk page if you have questions.

Cwmhiraeth (talk) 11:11, 21 January 2018 (UTC)[reply]

That's been removed, but there still appears to be some issues with the current version and the first version, which is being discussed at the teahouse. I'm going to leave a couple of detailed notices below to help you avoid future problems, don't let them worry you. Although you do need to know it is vital that you let us know if you have any relationship at all with Tig Tig. I may also have to hide the copyright violations later. Doug Weller talk 13:07, 21 January 2018 (UTC)[reply]
Thank you @Doug Weller:. The TIP TIG page was my first article on Wikipedia and I made a lot of mistakes and I am still learning how to write a good article and work to help Wikipedia. I don't have a relationship to TIP TIG. I am a welding engineer and works for a welding institute. But I do like all the new welding processes like TIP TIG, Cold Metal Transfer, STT, RMD. First, I did an article on TIP TIG and worked a little bit on Cold Metal Transfer. My next steps will be doing articles for STT and RMD. Please can you help me and tell me what I have to do with the TIP TIG article making it better and to avoid the deletion. THX JP1308 (talk) 13:26, 21 January 2018 (UTC)[reply]
[edit]

Control copyright icon Hello JP1308, and welcome to Wikipedia. While we appreciate your contributions to Wikipedia, there are certain things you must keep in mind about using information from sources to avoid copyright and plagiarism issues here.

  • You can only copy/translate a small amount of a source, and you must mark what you take as a direct quotation with double quotation marks (") and cite the source using an inline citation. You can read about this at Wikipedia:Non-free content in the sections on "text". See also Help:Referencing for beginners, for how to cite sources here.
  • Aside from limited quotation, you must put all information in your own words and structure, in proper paraphrase. Following the source's words too closely can create copyright problems, so it is not permitted here; see Wikipedia:Close paraphrasing. (There is a college-level introduction to paraphrase, with examples, hosted by the Online Writing Lab of Purdue.) Even when using your own words, you are still, however, asked to cite your sources to verify the information and to demonstrate that the content is not original research.
  • Our primary policy on using copyrighted content is Wikipedia:Copyrights. You may also want to review Wikipedia:Copy-paste.
  • If you own the copyright to the source you want to copy or are a legally designated agent, you may be able to license that text so that we can publish it here. Understand, though, that unlike many other sites, where a person can license their content for use there and retain non-free ownership, that is not possible at Wikipedia. Rather, the release of content must be irrevocable, to the world, into the public domain (PD) or under a suitably-free and compatible copyright license. Such a release must be done in a verifiable manner, so that the authority of the person purporting to release the copyright is evidenced. See Wikipedia:Donating copyrighted materials.
  • In very rare cases (that is, for sources that are PD or compatibly licensed) it may be possible to include greater portions of a source text. However, please seek help at Wikipedia:Media copyright questions, the help desk or the Teahouse before adding such content to the article. 99.9% of sources may not be added in this way, so it is necessary to seek confirmation first. If you do confirm that a source is public domain or compatibly licensed, you will still need to provide full attribution; see Wikipedia:Plagiarism for the steps you need to follow.
  • Also note that Wikipedia articles may not be copied or translated without attribution. If you want to copy or translate from another Wikipedia project or article, you must follow the copyright attribution steps in Wikipedia:Translation#How to translate. See also Wikipedia:Copying within Wikipedia.

It's very important that contributors understand and follow these practices, as policy requires that people who persistently do not must be blocked from editing. If you have any questions about this, you are welcome to leave me a message on my talk page. Thank you. Doug Weller talk 13:07, 21 January 2018 (UTC)[reply]

January 2018

[edit]

Information icon Thank you for your contributions to Wikipedia. It appears that you copied or moved text from one or more pages into another page. While you are welcome to re-use Wikipedia's content, here or elsewhere, Wikipedia's licensing does require that you provide attribution to the original contributor(s). When copying within Wikipedia, this is supplied at minimum in an edit summary at the page into which you've copied content, disclosing the copying and linking to the copied page, e.g., copied content from [[page name]]; see that page's history for attribution. It is good practice, especially if copying is extensive, to also place a properly formatted {{copied}} template on the talk pages of the source and destination. The attribution has been provided for this situation, but if you have copied material between pages before, even if it was a long time ago, please provide attribution for that duplication. You can read more about the procedure and the reasons at Wikipedia:Copying within Wikipedia. Thank you. Doug Weller talk 13:08, 21 January 2018 (UTC)[reply]

Declaring any conflicts of interest

[edit]
Information icon

Hello JP1308. The nature of your edits gives the impression you have an undisclosed financial stake in promoting a topic, such as the edit you made to TIP TIG, and that you have not complied with Wikipedia's mandatory paid editing disclosure requirements. Paid advocacy is a category of conflict of interest (COI) editing that involves being compensated by a person, group, company or organization to use Wikipedia to promote their interests. Undisclosed paid advocacy is prohibited by our policies on neutral point of view and what Wikipedia is not, and is an especially egregious type of COI; the Wikimedia Foundation regards it as a "black hat" practice akin to Black hat SEO.

Paid advocates are very strongly discouraged from direct article editing, and should instead propose changes on the talk page of the article in question if an article exists, and if it does not, from attempting to write an article at all. At best, any proposed article creation should be submitted through the articles for creation process, rather than directly.

Regardless, if you are receiving or expect to receive compensation for your edits, broadly construed, you are required by the Wikimedia Terms of Use to disclose your employer, client and affiliation. You can post such a mandatory disclosure to your user page at User:JP1308. The template {{Paid}} can be used for this purpose – e.g. in the form: {{paid|user=JP1308|employer=InsertName|client=InsertName}}. If I am mistaken – you are not being directly or indirectly compensated for your edits – please state that in response to this message. Otherwise, please provide the required disclosure. In either case, please do not edit further until you answer this message. jcc (tea and biscuits) 14:15, 21 January 2018 (UTC)[reply]

Hello @Jcc:, thank you for your help and your time. I am very sorry if I did something wrong. Yes, I am a welding engineer and yes, I am working for the AWS in the R&D department. Please inform yourself what the AWS stands for and what the AWS is (https://www.aws.org/). And no I DO NOT get any money from TIP TIG or any other welding company. And no I am not related to TIP TIG or any other welding company. My intention when I started to do this article was to write down all the new processes like TIP TIG, CMT, STT, RMD, etc., which came out in the last years and which have a big influence on the whole industry. At the moment I am very overstrained, so please feel free to delete the article. I am not sure if Wikipedia is the right place for me. JP1308 (talk) 15:58, 22 January 2018 (UTC)[reply]
Hi and thanks for your disclosure. What I've done is left the requisite template on the talk page, to all intents and purposes carry on as you are- your editing seems to be untainted by COI. Thanks for your contributions to Wikipedia, and return whenever you're ready. jcc (tea and biscuits) 17:48, 22 January 2018 (UTC)[reply]
[edit]

I see that you've told another editor " Another point is, that I work for the AWS and the inventor/owner of this welding process allowed us to use every kind of content/pictures/videos about TIP TIG".

That raises two issues. I'm assuming AWS is American Welding Society? You need to read WP:PAID and comply with that.

The other is that you can't use TIP TIG material on Wikipedia without TIP TIG releasing it to us themselves. Once released it can be used on Wikipedia and copied anywhere with a compatible license. Please read Wikipedia:Copyrights.

I'm not suggesting that you've done anything wrong as you are new and won't know our policies, let alone the ones with legal effect such as the ones I've linked to in this post. Thanks. Doug Weller talk 15:54, 21 January 2018 (UTC)[reply]

Hello @Doug Weller:, thank you for your help and your time. I am very sorry if I did something wrong. Yes, I am a welding engineer and yes, I am working for the AWS in the R&D department. Please inform yourself what the AWS stands for and what the AWS is (https://www.aws.org/). And no I DO NOT get any money from TIP TIG or any other welding company. And no I am not related to TIP TIG or any other welding company. My intention when I started to do this article was to write down all the new processes like TIP TIG, CMT, STT, RMD, etc., which came out in the last years and which have a big influence on the whole industry. At the moment I am very overstrained, so please feel free to delete the article. I am not sure if Wikipedia is the right place for me. JP1308 (talk) 16:02, 22 January 2018 (UTC)[reply]
I'm sorry you're having a rough time, but no one has it in for you if that's the way you feel. I'm glad I was right about AWS. I believe what you say about yourself. We have a huge problem with undeclared paid editors (paid editing is ok so long as it complies with our policies and guidelines, undeclared breaks our terms of use) and with copyright violations. I must have spent 2 hours today working on those instead of improving articles. Take a break if you need it and come back. Your plans seem good. Doug Weller talk 17:56, 22 January 2018 (UTC)[reply]