Template:Infobox engine

BMW S65B40O0
BMW S65B40O0
Overview
Manufacturer	Bayerische Motoren Werke AG (BMW)
Also called	Monster
Production	2007–2013
Layout
Configuration	90° V8
Displacement	4.0 L; 244.0 cu in (3,999 cc)
Cylinder bore	92 mm (3.622 in)
Piston stroke	75.2 mm (2.961 in)
Block material	Aluminum–silicon alloy
Head material	Aluminum alloy
Valvetrain	DOHC
Compression ratio	12.0:1
Combustion
Fuel system	Fuel injection
Management	MSS60 ECU
Fuel type	Gasoline
Cooling system	Water-cooled
Output
Power output	309 kilowatts (414 hp)
Torque output	400 N⋅m (295 lb⋅ft)
Dimensions
Length	734 mm (28.9 in)
Width	505 mm (19.9 in)
Height	611 mm (24.1 in)
Dry weight	147 kg (324 lb)
Chronology
Predecessor	BMW S54
Successor	BMW S88

{{{name}}}
{{{name}}}
	[[File:{{{image}}}\|{{{image_size}}}\|alt={{{alt}}}\|upright={{{upright}}}]] {{{caption}}}
Overview
Manufacturer	{{{manufacturer}}}
Designer	{{{designer}}}
Also called	{{{aka}}}
Production	{{{production}}}
Layout
Configuration	{{{configuration}}}
Displacement	{{{displacement}}}
Cylinder bore	{{{bore}}}
Piston stroke	{{{stroke}}}
Block material	{{{block}}}
Head material	{{{head}}}
Valvetrain	{{{valvetrain}}}
Compression ratio	{{{compression}}}
RPM range
Idle	{{{idle}}}
Redline	{{{redline}}}
Combustion
Supercharger	{{{supercharger}}}
Turbocharger	{{{turbocharger}}}
Fuel system	{{{fuelsystem}}}
Management	{{{management}}}
Fuel type	{{{fueltype}}}
Oil system	{{{oilsystem}}}
Cooling system	{{{coolingsystem}}}
Output
Power output	{{{power}}}
Specific power	{{{specpower}}}
Torque output	{{{torque}}}
Dimensions
Length	{{{length}}}
Width	{{{width}}}
Height	{{{height}}}
Diameter	{{{diameter}}}
Dry weight	{{{weight}}}
Emissions
Emissions target standard	{{{emissions level}}}
Emissions control technology	{{{emissions control}}}
Chronology
Predecessor	{{{predecessor}}}
Successor	{{{successor}}}

Template documentation[view] [edit] [history] [purge]

This template is used in articles about engines, including, but not limited to automobile and industrial engines.

Usage[change source]

See the Parameters section of this document for basic explanations of what data to enter in each parameter.
See WikiProject Automobiles/Conventions for detailed explanations of what data to enter in certain parameters and instructions on how to correctly format the data.
When entering more than one data point per parameter, use the unbulleted list template {{ubl | fact one | fact two | et cetera }} to put each entry on a separate line. Do not use <br /> to create line breaks in the infobox.
In the infobox templates below, conversion templates have been provided for your convenience. After copying the infobox template into the article, enter the data, replacing "NNNN" with numeric entries. When entering data into the conversion template, enter digits without thousands separators; i.e. 4287 not 4,287.

{{Infobox engine
| name          = 
| image         = 
| manufacturer  = 
| aka           = 
| production    = 
| predecessor   = 
| successor     = 
| configuration = 
| displacement  = 
| bore          = 
| stroke        = 
| block         = 
| head          = 
| valvetrain    = 
| compression   = 
| supercharger  = 
| turbocharger  = 
| turboboostpressure =
| fuelsystem    = 
| management    = 
| fueltype      = 
| oilsystem     = 
| coolingsystem = 
| idle          =
| redline       =
| power         = 
| specpower     = 
| torque        = 
| length        = 
| width         = 
| height        = 
| diameter      = 
| weight        = 
| emissions level =
| emissions control =
}}

Parameters[change source]

name: Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
Examples: M104 or EcoBoost or N53 or Atlas
image: Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle
See WikiProject Automobiles/Images
manufacturer: Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
designer: Person responsible for the development of the engine (this should be one or more natural persons)
aka: Other common or popular names used by the public or by the manufacturer in marketing materials
Examples: Cobra-Jet or Hemi
production: Calendar year range when the engine was produced, not the model year
Months are recommended if available, but exact dates are discouraged.
Examples: 1901 (1901)-1902 (1902) or January 1901 (1901-01)-February 1902 (1902-02) but not January 31, 1901 (1901-01-31)-February 28, 1902 (1902-02-28).
Use {{Start date|yyyy}}-{{End date|yyyy}} or {{Start date|yyyy|mm}}-{{End date|yyyy|mm}} where yyyy is the year and mm is the numeric month.
predecessor: Name of older or previous engine that was replaced by the engine listed in the Name field of the infobox
Leave blank if this does not apply.
successor: Name of newer or next engine that replaced the engine listed in the Name field of the infobox
Leave blank if this does not apply.
configuration: Arrangement and number of cylinders or rotors
Examples: Straight-6, Flat-4, V8 or W12. See Engine configuration.
displacement: Engine displacement in litres or cubic centimeters may be used where appropriate
Use {{convert|x.x|L|cuin|abbr=on}} where x.x is the displacement in liters or {{convert|xxxx|cc|cuin|abbr=on}} where xxxx is the displacement in cubic centimenters.
Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use {{Auto Lrev|xxx}} where xxx is the displacement in cubic inches.
See WikiProject Automobiles/Conventions - Displacement.
bore: Measurement of the cylinder bore in millimeters
Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the bore in millimeters.
stroke: Measurement of the piston stroke in millimeters
Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the stroke in millimeters.
block: Material used to construct the engine block
Examples: cast iron or aluminum
head: Material used to construct the Cylinder head
Examples: cast iron or aluminum
valvetrain: Description of the valvetrain
Examples: DOHC, OHC or OHV
compression: Engine compression ratio
Example: 10:1
supercharger: Manufacturer, model and type of superchager if known, otherwise type of supercharger
Example of manufacturer, model and type: [[Eaton Corporation|Eaton]] R410 TVS roots type
Examples of types: Roots, Lysholm screw, Sliding vane or Scroll
Leave blank if this does not apply.
turbocharger: Number of turbochargers (single, dual, quad, etc.) and manufacturer and model if known, otherwise number of turbochargers
Example: Single [[IHI Corporation|IHI]] VF48 or Twin [[Honeywell]] GT15 or Quad [[IHI Corporation|IHI]] VN65
Leave blank if this does not apply.
fuelsystem: Fuel delivery system
Examples: carburetor, fuel injection
If carburetted, state make and model of carburetor if known.
Examples: [[Solex]] 34 or [[Weber carburettor|Weber]] 45
If fuel injected state make, model and characteristics of fuel injection system if known.
Example: [[Robert Bosch GmbH|Bosch]] [[Jetronic#KE-Jetronic (1985–1993)|KE-Jetronic]] electronically-controlled, mechanical fuel injection
management: Type of engine management system
Examples: Bosch Motronic, Digifant
fueltype: Fuel used to cause combustion or movement of the pistons
Examples: gasoline, diesel, steam etc.
oilsystem: Type of oil system
Examples: wet sump, dry sump, etc.
coolingsystem: Type of cooling system
Examples: air-cooled, water-cooled, oil-cooled, etc.
idle: Governed idle rpm i.e. the speed engine rotates under no load under minimal throttle to sustain engine functions.
redline: Redline i.e. the maximal speed engine is designed to be operated continuously at full throttle under load. Not to be confused with high idle and maximal governed RPM.
power: Engine power
For engines used in U.S. home market cars use {{convert|xxx|hp|kW|abbr=on}} where xxx is the power in horsepower (hp).
For engines used in Japanese home market cars use {{convert|xxx|PS|kW hp|abbr=on}} where xxx is power in metric horsepower (PS).
For engines used in British home market cars use {{convert|xxx|bhp|kW PS|abbr=on}} where xxx is power in brake horsepower (bhp).
For engines used in rest-of-world home market cars use {{convert|xxx|kW|hp|abbr=on}} where xxx is power in kilowatts (kW).
See WikiProject Automobiles/Conventions - Power.
specpower: Specific power
torque: Peak torque at a specified revolutions per minute (rpm)
For engines used in U.S. home market cars use {{convert|xxx|ft.lbf|Nm|abbr=on}} at yyyy rpm where xxx is the torque in foot-pounds and yyyy is the rpm.
For engines used in rest-of-world home market cars use {{convert|xxx|Nm|ft.lbf|abbr=on}} at yyyy rpm. where xxx is the torque in Newton meters and yyyy is the rpm.
See WikiProject Automobiles/Conventions - Torque.
length: Longest dimension of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the length in millimeters.
width: Shorter of the two length measurements of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the width in millimeters.
height: Maximum height of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the height in millimeters.
diameter: Diameter of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the diameter in millimeters.
Leave blank if this does not apply.
weight: Weight of the engine in kilograms
Use {{convert|xxx|kg|lb|abbr=on}} where xxx is the weight in kilograms.
emissions level: The most stringent emissions standard(s) the engine is tested to satisfy
If an engine has been certified multiple times, list the lowest and highest standard unless intermediate standards marked an important development step.
For engines used in U.S. home market cars use United States emission standards.
For engines used in EU common market cars use European emission standards.
For engines used in rest-of-world home market cars use the locally applicable standard.
emissions control: Technology employed to control emissions below target level
Examples: [[Secondary air injection|Air Injection]] or [[Exhaust gas recirculation|EGR]] or [[Catalytic converter]].

Example[change source]

Note: The data below may not reflect the actual specifications of the engine used for this example.

{{Infobox automobile engine
| name          = BMW S65B40O0
| image         = BMW S65 Engine.JPG
| manufacturer  = [[BMW|Bayerische Motoren Werke AG (BMW)]]
| aka           = Monster
| production    = 2007–2013
| predecessor   = [[BMW M54#S54B32|BMW S54]]
| successor     = BMW S88
| configuration = 90° [[V8 engine|V8]]
| displacement  = {{convert|3999|cc|L|1|order=flip|abbr=on}}
| bore          = 92 mm
| stroke        = 75.2 mm
| block         = [[Aluminum]]–[[silicon]] [[alloy]]
| head          = Aluminum alloy
| valvetrain    = [[DOHC]]
| compression   = 12.0:1
| supercharger  = 
| turbocharger  = 
| fuelsystem    = [[Fuel injection]]
| management    = MSS60 [[Engine control unit|ECU]]
| fueltype      = [[Gasoline]]
| oilsystem     = 
| coolingsystem = [[Water-cooled]]
| power         = {{convert|309|kW|0}}
| specpower     = 
| torque        = {{convert|400|N.m|lb.ft|0|abbr=on}}
| length        = {{convert|734|mm|in|abbr=on}}
| width         = {{convert|505|mm|in|abbr=on}}
| height        = {{convert|611|mm|in|abbr=on}}
| diameter      = 
| weight        = {{convert|147|kg|lb|abbr=on}}
}}

TemplateData[change source]

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox engine in articles based on its TemplateData.

TemplateData for Infobox engine

This template is used in articles about engines, including, but not limited to automobile and industrial engines.

Template parameters[Edit template data]
This template prefers block formatting of parameters.
Parameter		Description	Type	Status
Name	`name`	Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine)	Line	required
Image	`image`	Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle	Unknown	optional
Image Size	`image_size`	no description	String	optional
Alt Text for Image	`alt`	Alt text for people who cannot see the image.	String	optional
upright	`upright`	no description	Unknown	optional
interiorimage	`interiorimage`	no description	Unknown	optional
Caption	`caption`	The caption field describes the engine pictured in the Image field above.	String	optional
Manufacturer	`manufacturer`	Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)	String	suggested
Designer	`designer`	Person responsible for the development of the engine (this should be one or more natural persons)	Unknown	optional
aka	`aka`	Other common or popular names used by the public or by the manufacturer in marketing materials	String	optional
Production	`production`	Calendar year range when the engine was produced, not the model year. Months are recommended if available, but exact dates are discouraged. Use {{Start date\|yyyy}}-{{End date\|yyyy}} or {{Start date\|yyyy\|mm}}-{{End date\|yyyy\|mm}} where yyyy is the year and mm is the numeric month. Example {{start date\|1901}}-{{end date\|1902}} or {{start date\|1901\|01}}-{{end date\|1902\|02}}	Unknown	optional
Configuration	`configuration`	Arrangement and number of cylinders or rotors Example Straight-6, Flat-4, V8 or W12	String	optional
Displacement	`displacement`	Engine displacement in litres or cubic centimeters may be used where appropriate. Use {{convert\|x.x\|L\|cuin\|abbr=on}} where x.x is the displacement in liters or {{convert\|xxxx\|cc\|cuin\|abbr=on}} where xxxx is the displacement in cubic centimenters. Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use {{Auto Lrev\|xxx}} where xxx is the displacement in cubic inches.	Unknown	optional
Bore	`bore`	Measurement of the cylinder bore in millimeters. Use {{convert\|xx.xx\|mm\|in\|abbr=on}} where xx.xx is the bore in millimeters.	Unknown	optional
stroke	`stroke`	Measurement of the piston stroke in millimeters. Use {{convert\|xx.xx\|mm\|in\|abbr=on}} where xx.xx is the stroke in millimeters.	Unknown	optional
block	`block`	Material used to construct the engine block	Unknown	optional
head	`head`	Material used to construct the cylinder head.	Unknown	optional
valvetrain	`valvetrain`	no description	Unknown	optional
compression	`compression`	no description	Unknown	optional
idle	`idle`	no description	Unknown	optional
redline	`redline`	no description	Unknown	optional
supercharger	`supercharger`	no description	Unknown	optional
turbocharger	`turbocharger`	no description	Unknown	optional
fuelsystem	`fuelsystem`	no description	Unknown	optional
management	`management`	no description	Unknown	optional
fueltype	`fueltype`	no description	Unknown	optional
oilsystem	`oilsystem`	no description	Unknown	optional
coolingsystem	`coolingsystem`	no description	Unknown	optional
power	`power`	no description	Unknown	optional
specpower	`specpower`	no description	Unknown	optional
torque	`torque`	no description	Unknown	optional
length	`length`	no description	Unknown	optional
width	`width`	no description	Unknown	optional
height	`height`	no description	Unknown	optional
diameter	`diameter`	no description	Unknown	optional
weight	`weight`	no description	Unknown	optional
emissions level	`emissions level`	no description	Unknown	optional
emissions control	`emissions control`	no description	Unknown	optional
predecessor	`predecessor`	no description	Unknown	optional
successor	`successor`	no description	Unknown	optional

The documentation on top is transcluded from Template:Infobox engine/doc.
Editors can experiment in this template's sandbox and testcases pages.
Add categories to the /doc subpage. Subpages of this template.